Knowledge Base
Systemline
Systemline Support
Recent Articles
S4.3 - Quick Install Guide
Find attached the Quick Install Guide for the Systemline S4.3S4.3 - User Manual
Attached is the Systemline S4.3 User Manual.E50 - Q. Not pairing '‘ pairing unsuccessful, make sure systemline E50 unit is turned on, in range and ready to pair’
Answer: If you're seeing ‘pairing unsuccessful, make sure systemline E50 unit is turned on, in range and ready to pair’ please take the following steps. 1. Prepare you connecting device ready to pair. 2. Ensure blue LED on E50 panel is flashing. 3. ...Systemline Modular - Installation Guide
The document provided is for use in understanding/fault finding a Systemline Modular installation, this document should not be copied/shared/hosted on other sites that are not authorised to do so. All documentation and use of is protected under ...E-Series - Q. My original E50/E100 plug-top type power supply has been replaced with an 'in-line' brick type, but the DC connection is different?
Answer: We moved away from the plug-top type power supply to aid install of the E50/E100 product as it allows it to be hidden and wired direct into it's own fused spur. Unfortunately the DC cable that was supplied with the original plug-top type is ...
Popular Articles
S7 - Q. How can I use my premium TIDAL subscription service with S7?
Answer: Please refer to the attached guide, for assistance on adding the TIDAL plugin to Systemline S7.Modular - Q. Which replacement battery will I need for my RM1 remote?
Answer: The battery required for the RM1 handset/remote is an MN21/23 12V battery. To access the battery, please see the attached diagram.E100 - Q. Which replacement battery will I need for my remote?
Answer: The battery required for the E100 remote is a CR2025 3v lithium battery. To access the battery, please see the attached diagram.E50/E100 - Q. How do I install my E50/E100 with 4 x loudspeakers (8 Ohm)?
Answer: Systemline E Series E50 and E100 can support up to 4 loudspeakers (2 stereo pairs), with a minimum impedance per loudspeaker of 8 ohms, attached are the wiring combinations. Please note that diagram 1.2 shows the use of a QED WM15 (purchased ...E50/E100 - Q. What is the minimum/maximum rating that should be used as a fused spur when installing the in-line power supply?
Answer: The E50 and E100 in-wall keypads are now supplied with an in-line power supply, this can be either plugged into a standard 13A socket or if required, the mains plug can be removed from the mains cable and terminated into a fused spur rated at ...