E50/E100 - Q. How do I install my E50/E100 with 4 x loudspeakers (8 Ohm)?

• Related Articles

• S4.3 - Quick Install Guide

  Find attached the Quick Install Guide for the Systemline S4.3

• Systemline Modular - Quick Install Card

  Attached is a 'Quick Install' card which covers the basic setup of a zone including the wiring of active loudspeaker and how to change aspects of the zone such as tone, turn on volume, max volume and zone addressing. This document should be used with ...

• Systemline E Series - CE Declaration of Conformity - 2016

  The attached are the CE Declaration of Conformity for the Systemline E Series E50 and E100.

• E50/E100 - Q. What is the RMS wattage per channel of the E Series E100 and E50?

  Answer: Both the E Series E100 and E50 are rated at 17 watts per channel, this is the same whether you have 1 pair or 2 pairs (wired in parallel) of loudspeakers attached having an impedance of 8 ohms.  A 6 ohm nominal impedance loudspeaker pair can ...

• Systemline S7 NetConnect - Support Documents and Images

  Please find attached helpful support documents and images relating to the Systemline S7 NetConnect, including instructions, specification sheet, quick start guide, mounting template, Cat5 cable adaptor and set up assistance. Note: Unauthorised ...