E-Series - Q. My original E50/E100 plug-top type power supply has been replaced with an 'in-line' brick type, but the DC connection is different?
Answer:
We moved away from the plug-top type power supply to aid install of the E50/E100 product as it allows it to be hidden and wired direct into it's own fused spur. Unfortunately the DC cable that was supplied with the original plug-top type is slightly different and you will need to purchase an aftermarket adapter as seen here
Related Articles
E Series - Q. What is the size of the in-line power supply for the E50/E100?
Answer: The in-line PSU is 122mm x 55mm x 35mm.
E50/E100 - Q. What is the minimum/maximum rating that should be used as a fused spur when installing the in-line power supply?
Answer: The E50 and E100 in-wall keypads are now supplied with an in-line power supply, this can be either plugged into a standard 13A socket or if required, the mains plug can be removed from the mains cable and terminated into a fused spur rated at ...
E50/E100 - Q. Can I extend/shorten the 5m DC cable?
Answer: No, please note that the supplied 5M extension cable that sits between the power supply and the installed keypad cannot be altered, doing so will void any warranty and the system will not function correctly. Instead, our suggestion is to ...
Systemline E Series E100 5m DC Extension Cable Specification Document
Attached are the details and specification of the 5M DC extension cable provided with the Systemline E100 in-wall DAB/FM/Bluetooth/Analogue In system.
Systemline S7 NetConnect - Support Documents and Images
Please find attached helpful support documents and images relating to the Systemline S7 NetConnect, including instructions, specification sheet, quick start guide, mounting template, Cat5 cable adaptor and set up assistance. Note: Unauthorised ...