E50 - Q. Not pairing '‘ pairing unsuccessful, make sure systemline E50 unit is turned on, in range and ready to pair’
Answer:
If you're seeing ‘pairing unsuccessful, make sure systemline E50 unit is turned on, in range and ready to pair’ please take the following steps.
1. Prepare you connecting device ready to pair.
2. Ensure blue LED on E50 panel is flashing.
3. Press and hold source selection on panel until you hear a beep through speakers.
4. Now pair your device on screen. Note the window of time to complete pairing is short to stop unwanted devices connecting.
Related Articles
Systemline S7 NetAmp - Support Documents and Images
Please find attached helpful support documents and images relating to the Systemline S7 NetAmp, including instructions, specification sheet, quick start guide, software notes and IR control files. Note: Unauthorised redistribution, publication online ...
E100 - Q. Can I pair my keypad via Bluetooth with my Amazon Echo Dot?
Answer: Unfortunately the Amazon Echo Dot is not compatible with secure pairing. The E100 was designed before the Amazon Echo Dot, for use with mobile telephones or tablets which are compatible with secure pairing. We use a secure pairing method, ...
E50 - Q. How do I remove the Bluetooth pairings from my Systemline E50?
Answer: With the E50 in standby, press and hold the standby/power button - you will notice that the Systemline house logo will flash and once it changes to a solid red LED, all Bluetooth pairings should be removed.
E50 - Q. How do I pair an Amazon Show (Alexa) with my Systemline E50?
Answer: For a step-by-step guide on how to pair the Systemline E50 with an Amazon Show, please see the attached instructions.
E100 - Q. How do I remove the Bluetooth pairings from my Systemline E100?
Answer: You should be able to remove the Bluetooth pairings on an E100 by performing a factory reset. Please go to Source>Menu>Main Menu>Factory Reset>Enter>Display.