E50/E100 - Q. Why does my keypad keep going into standby when I use an analogue input?
Answer:
Please be aware that the volume of the source device must be set to maximum so that the E50/E100 is able to detect the full audio signal which will prevent it from going into standby. You may also note an arrow icon pointing upward; this is to show that a higher source volume is required.
Related Articles
E50/E100 - Q. How can I connect if my TV does not have a headphone jack?
Answer: We would recommend a wired connection in this instance, and although your TV does not have a headphone port, provided your TV has phono/RCA connections, you should be able to use a jack to phono cable like this. If there is no headphone port ...
E Series - Q. What is the size of the in-line power supply for the E50/E100?
Answer: The in-line PSU is 122mm x 55mm x 35mm.
Systemline E Series - CE Declaration of Conformity - 2016
The attached are the CE Declaration of Conformity for the Systemline E Series E50 and E100.
E50 - Q. What is the power consumption of my Systemline E50 when in standby?
Answer: During standby, the E50 will consume less than 1W, whereas deep standby it would only consume 0.5W.
Systemline S7 NetAmp - Support Documents and Images
Please find attached helpful support documents and images relating to the Systemline S7 NetAmp, including instructions, specification sheet, quick start guide, software notes and IR control files. Note: Unauthorised redistribution, publication online ...