S7 - Q. How do I get Sky Q remotes to work with Systemline S7

S7 - Q. How do I get Sky Q remotes to work with Systemline S7

Answer:

Sky Q touch pad remote

There are no direct codes for this remote, the setup is done inside the Sky Q box itself via the menu (please refer to the Sky Q user guide), select Phillips as the manufacturer. You are then given 33 possible options and you just have to work through them until the Touch remote controls the volume of the TV sound heard through the in-ceiling loudspeakers (it normally works on option 7). You should now have control of volume up, down and mute via the Sky Q Touch.

Sky Q IR remote
  1. Hold down buttons 1 and 3 on the Sky Q remote (not touch remote) you should see red LED flash twice
  2. Press ? (bottom right)
  3. Press 0 2 9 7 each digit should respond with a flash on the red LED the last digit will give 2 flashes from the Red LED which will indicate that the code has been successfully stored
  4. Volume up, down and mute should now operate the NetAmp