Systemline Modular - LRN7 - Learning Handset programming software.

• Related Articles

• S6/S6.2/Modular - LRN7 Learning remote control user manual/instructions.

  Attached is the user manual/instructions for using the Systemline LRN7 that was used in Modular Multi-Source / S6 and S6.2 systems

• Systemline Modular Advanced - SystemNet Configuration Software v15.4

  Programming software used in the configuration of Systemline Modular Advanced/S6/S6.2 including Wireless Controller. This software should be used with caution as it will overwrite existing configuration files already uploaded to Systemline ...

• Systemline Modular - SLM3 Configuration Guide and LRN7 setup file

  The attached .zip file contains the setup guide and LRN7 config file for altering the operation parameters of the SLM3 loudspeaker. Requires LRN7 remote and LRN7 Learning Handset programming software (not contained within .zip)

• Systemline Modular - AM8 Multi-Source Instruction Manual

  Attached you'll find a document covering instructions on how to use the Modular AM8 Hub. Please do not copy, share, publish or distribute this material electronically or otherwise without the permission of the owner.

• Systemline Modular/S6/S6.2 - IR Codes in Hexadecimal Format

  Below are the IR codes in Hex format for Systemline Modular, where the zone address is default (address 1) and has not been changed. Copy and paste the below Hex info between the brackets into your programming software. Standby 0000 006D 000C 0018 ...