E50/E100 - Q. What length is the loudspeaker cable included with the pack?

• Related Articles

• E50/E100 - Q. What's the maximum length of loudspeaker cable I can run from the keypad?

  Answer: This really depends on the gauge of the loudspeaker cable being used, but if we take the cable that is included with your E50 or E100 which is 19AWG (American Wire Gauge), and then assume the the loudspeakers will be 8 ohm impedance (as we ...

• E Series - Q. Which AWG speaker cable can be used with the E50/E100?

  Answer: The speaker terminal blocks on the E50 and E100 models will accept 22-14 AWG.

• E50/E100 - Q. What is the RMS wattage per channel of the E Series E100 and E50?

  Answer: Both the E Series E100 and E50 are rated at 17 watts per channel, this is the same whether you have 1 pair or 2 pairs (wired in parallel) of loudspeakers attached having an impedance of 8 ohms.  A 6 ohm nominal impedance loudspeaker pair can ...

• Systemline E Series - CE Declaration of Conformity - 2016

  The attached are the CE Declaration of Conformity for the Systemline E Series E50 and E100.

• E Series - Q. What is the size of the in-line power supply for the E50/E100?

  Answer: The in-line PSU is 122mm x 55mm x 35mm.